710公海

Operation of vertical mill
Update time:2022-04-02 Clicked:364

The operation of vertical mill can be summarized as follows:


One look, two considerations, three tones and four stability


First, look at the parameters of each measuring point of the equipment to determine the operation of the equipment;


Second, give consideration to the wind pulling of kiln mill and the water spraying of humidification tower and mill;


Three regulation, air regulation, seasoning and speed regulation;


Fourth, stabilize the thickness of the material layer, stabilize the vibration value of the mill, stabilize the differential pressure of the mill, and stabilize the fineness and moisture of the product.


The following is a brief discussion on these problems.

 
Address: No. 685, Huanghe West Road, Xinbei District, Changzhou
Factory address: No. 685, Huanghe West Road, Xinbei District, Changzhou
Contact: Mr. Qu 13382802800, Mr. Liu 13775079292
mobiles: 13382802800 (24-hour service line)
Tel: 0519-83200615 Fax: 051983209554
 
Copyright© 2022 Changzhou Xuanda hydraulic Electromechanical Equipment Co., Ltd.All Rights Reserved